TokoIndosupply - Jual Alat Laboratorium dan Alat Teknik

HIOKI PW3198 Power Quality Analyzer

Rp. 1.234
Update Terakhir
16 Mar 2023
Negara Asal
Pembelian Min
Power Meters

HIOKI PW3198 Power Quality Analyzer

Verify power problems in accordance with the IEC61000-4-30 Class A standard

High Accuracy and continuous gapless recording ( V: ± 0.1% of nominal voltage, A and W: ± 0.2% rdg. ± 0.1% f.s.)

CAT IV 600V - safe enough for incoming power lines

Broadband voltage range lets you measure even high-order harmonic components of up to 80 kHz

Wide dynamic range from low voltages up to 1300V ( 3P4W line-to-line voltage)

Maximum 6000V transient overvoltage up to 700kHz

LAN, USB and SD card interfaces

Optional GPS BOX for synchronizing multiple devices

Beli HIOKI PW3198 Power Quality Analyzer dengan harga kompetitif dan cari produk dari Test & Measurements, Gratis antar Jakarta dan dapat dikirim keseluruh Indonesia. Dapatkan hanya di toko online kucari, belanja online mudah dan aman.

Spesifikasi - HIOKI PW3198 Power Quality Analyzer

Measurement line type Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel ( must be synchronized to reference channel during AC/ DC measurement)

Voltage ranges Voltage measurement: 600.00 V rms

Transient measurement 6.0000 kV peak

Current ranges 500.00 mA to 5.0000 kA AC ( depends on current sensor in use)

Basic accuracy Voltage: ± 0.1% of nominal voltage

Current: ± 0.2% rdg. ± 0.1% f.s. + current sensor accuracy

Active power: ± 0.2% rdg. ± 0.1% f.s. + current sensor accuracy

Measurement items

Transient over voltage : 2MHz sampling.

Frequency cycle : Calculated as one cycle, 40 to 70Hz

Voltage ( 1/ 2) RMS: one cycle calculation refreshed every half cycle.

Current ( 1/ 2) RMS: half-cycle calculation.

Voltage swell, Voltage dips, Voltage interruption

Inrush current

Voltage waveform comparison

Instantaneous flicker value: As per IEC61000-4-15

Frequency: Calculated as 10 or 12 cycles, 40 to 70Hz

10-sec frequency: Calculated as the whole-cycle time during the specified 10s period, 40 to 70Hz

Voltage waveform peak, Current waveform peak

Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Reactive energy, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor ( negative-phase, zero-phase)

High-order harmonic component ( voltage/ current) : 2kHz to 80kHz

Harmonic/ Harmonic phase angle ( voltage/ current) , Harmonic power: 0th to 50th orders

Harmonic voltage-current phase angle: 1th to 50th orders

Total harmonic distortion factor ( voltage/ current)

Inter harmonic ( voltage/ current) : 0.5Hz to 49.5Hz

K Factor ( multiplication factor)

IEC Flicker, ” V10 Flicker

Record 55 weeks ( with repeated recording set to [ 1 Week] , 55 iterations)

35 days ( with repeated recording set to [ OFF] )

Interface SD/ SDHC card, RS-232C, LAN ( HTTP server funtion) , USB2.0

Display 6.5-inch TFT color LCD ( 640× 480 dots)

Power supply AC ADAPTER Z1002 ( 12V DC, Rated power supply 100V AC to 24 V AC, 50/ 60Hz)

BATTERY PACK Z1003 ( Ni-MH 7.2V DC 4500mAh)

Dimensions, mass 300mm( 11.81in) W × 211mm( 8.31in) H × 68mm( 2.68in) D ( excluding protrusions) , 2.6kg( 91.7oz) ( including battery pack)

Supplied accessories Instruction manual× 1, Measurement guide× 1, VOLTAGE CORD L1000× 1 set, Spiral Tube× 1, Input Cable Labels× 1, AC ADAPTER Z1002× 1, Strap× 1, USB cable ( 1m 3.28ft length) × 1, BATTERY PACK Z1003× 1, SD MEMORY CARD 2GB Z4001× 1

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :



Foto dari Pembeli

Ulasan dari Pembeli

Dengan Foto
Minta Penawaran
Produk Siap di Pesan
Rp 0